Difference Between DSL and ADSL

Difference Between DSL and ADSL

DSL vs ADSL
DSL (Digital Subscriber Line) is the generic term for services that provide internet connections using digital data connections between a modem and a phone line. What’s great about DSL, is that even when the phone line is in use, there is no interruption, and you can still experience a high speed internet connection even when you are making calls. The only issue is, that when you are close to the central office of the company with which you are subscribed, you will have faster internet, but when you are far from their central office, although you are within their scope, you will have a slower internet connection.

There are different types of DSL. There’s SDSL, VDSL, and ADSL. ADSL stands for Asymmetric Digital Subscriber Line. This type of service means that the speed of data sent is known as upstream, and the data received is known as downstream, and the speeds are not always guaranteed to be the same. They have different speeds that change from time to time. The most requested service is the ADSL service. In regards to ADSL, the internet service providers offer options for higher bandwidth, in upstream, downstream or both. The only thing is, they naturally charge higher rates for higher speeds.

ADSL uses a special ADSL modem, and a micro-filter in the subscriber’s telephone line.

This is what allows the ADSL service and telephone service to be used at the same time. The word ‘asymmetric’ in ADSL actually means that the downstream is faster than the upstream. ADSL supports a downstream rate of 1.5 to 9 Mbps, and an upstream rate of 16 to 640 Kbps.

When you use ADSL, your PC will always be connected to the internet, as long as the power is on, and once you ‘turn on’ your computer, your PC will automatically have an internet connection, unless you manually disconnect. Unlike dial-ups, ADSL can serve various computers within a house for multiple members simultaneously.

Summary:

The simple difference between DSL and ADSL is that DSL is the generic term for Digital Subscriber Line services, and ADSL, or Asymmetric Digital Subscriber Line, is just one of its types. There are other types of DSL, such as SDSL and VDSL.

Difference Between PPPoE and PPPoA

Difference Between PPPoE and PPPoA

PPPoE vs PPPoA

Many internet users are often plagued with the decision of what kind of protocol to use with their connection. There are many questions, experimentation, and flip-flopping between PPPoE and PPPoA. Unfortunately, many of the confusions hover above these two protocols.

Both of these protocols give internet service providers (ISP) the capability to rollout broadband use. Using these protocols gives relative security as it obliges the end-user to verify or authenticate to a server before having network access.

PPPoE and PPPoA are mainly used with Digital Subscriber Line (DSL). Both protocols provide flexibility in billing which is very advantageous to providers. Moreover, the use of network resources can be monitored easily and along with this feature, troubleshooting and managing network usage is less problematic.

PPPoE is an abbreviation Point-to-Point Protocol over Ethernet and it is a kind of networking protocol that encapsulates PPP frames inside the Ethernet frames. Basically, PPPoE is configured as a point to point connection between two Ethernet ports.

This protocol is normally used in ISP’s lower packages as PPPoE is often utilized to function in lower bandwidth throughput rate. PPPoE is perhaps the most common protocol used when connecting to the internet.

Point-to-Point Protocol over ATM (PPPoA) is also a network protocol but this time, it is for encapsulating frames inside AAL5 or ATM Adaption Layer 5. ATM means Asynchronous Transfer Mode, a kind of switching using time division multiplexing in an asynchronous manner.

In the enterprise packages, PPPoA is typically the protocol of choice. It will require a Static IP configured straight into the hardware (modem). PPPoA is said to have less overheads compared to PPPoE therefore, the former is slightly faster than the latter. However, for the end-user, the difference in speed is almost negligible.

Modems that support PPPoA use Asynchronous Transfer Mode — which uses very small, fixed-length packets, in contrast to Ethernet, which uses relatively large, variable-length packets — to do whatever it needs to do.

Summary:

1. PPPoE means Point-to-Point Protocol over Ethernet while PPPoA means Point-to-Point Protocol over ATM.

2. PPPoE encapsulates PPP frames inside the Ethernet frames while PPPoA encapsulates frames inside AAAL5.

3. PPPoE is often used in lower packages while PPPoA is often used in enterprise packages.

4. PPPoE is more commonly used than PPPoA.

5. PPPoA has slightly less overhead than PPPoE therefore, it is a bit faster.